cbb 16 2 i p series polypropylene film capacitor s for snubber applications features - very l ow d issipation f actor - highest p eak p ulse c apability - double - sided m etallized e lectrodes - design for snubber application - metal s prayed c ontacts for l ow esl - s elf -h ealing applications - h igh pulse and high frequency circuits - igbt applications item characteristics climatic c ategory 40/85/56 (iec 6 1071 ) operating temperature ? 4 0 ~ +85 c ( 85 c) storage temperature ? 40 ~ +85 c dc v oltage r ating u r,dc 700 ~ 200 0 v dc capacitance r ange 0, 56 ~ 7,5 f capacitance t olerance 10 % (k), 5 % (j) voltage between terminals u tt 1, 5 * u rdc (20 c, 10 s) voltage between ter minals and case u t c 3000 v ac ( 20 c, 50 hz, 10 s) capacitor dissipation f actor tan 5 * 10 dielectric dissipation f actor tan insulation r esistance 30.000 m? f (20 c, 100 v series inductan ce l s (typ.) 20 nh (20 c) life t ime e xpectancy 100.000 h, failure rate reference s tandard iec 61071:2007 , reach, rohs ratings for cbb 16 2 i p s eries u r (v) c r (f) dv/dt 20 c (v/s) ? (1) (a) r s (2) 100 khz 20 c (m) i max (3) 1 00 khz 70 c (a) w 1.0 (mm) h 1.0 (mm) t 1.0 (mm) p 1 1.0 (mm) p 2 1.0 (mm) ordering c ode 700v dc (380v ac ) 2q 3.00 325 975 5 22.4 42.5 45 30 37.5 20.3 fcs2qi p 305* a ff3720 e3 4.00 325 1300 4 25 42.5 43 42 37.5 20.3 fcs2qi p 405* a fe3720 e3 4.20 260 1092 3 26 57.5 43.5 29.5 52.5 20.3 fcs2qip425*a hg5220 e3 4.50 260 1170 3 26 57.5 45 30 52.5 20.3 fcs2qip455*a hh5220 e3 5.00 260 1300 3 27 57.5 45 35 52.5 20.3 fcs2qi p 505* a hj5220 e3 5.50 260 1430 2 27 57.5 50 35 52.5 20.3 fcs2qi p 555* a hl5220 e3 6.00 260 1560 2 28 57.5 45 45 52.5 20.3 fcs2qi p 605* a hk5220 e3 7.50 260 1950 2 30 57.5 55 40 52.5 20.3 fcs2qip 755* a hm5220 e3 (1) maximum permissible peak current ?*? to be defined, see ordering code table (2) series resistance at 20c ambient temperature customized pr oducts are available on request (3) maximum pe rmissible r.m.s. ripple current 201 6 v 1 . 2
cbb 16 2 i p series ratings for cbb 162 i p s eries u r (v) c r (f) dv/dt 20 c (v/s) ? (1) (a) r s (2) 100 khz 20 c (m) i max (3) 100 khz 70 c (a) w 1.0 (mm) h 1.0 (mm) t 1.0 (mm) p 1 1.0 (mm) p 2 1.0 (mm) ordering c ode 850v dc (450v ac ) k2 2.20 400 880 6 21.5 42.5 45 30 37.5 20.3 fcsk2 ip 225* a ff3720 e3 2.80 400 1120 5 24 42.5 43 42 37.5 20.3 fcsk2 ip 285* a fe3720 e3 3.00 290 870 4 24 57 .5 43 .5 29 .5 52.5 20.3 fcsk2ip305*a hg5220 e3 3.00 290 870 4 25 57 .5 45 30 52.5 20.3 fcsk2ip305*a hh 52 20 e3 3.50 29 0 1 015 4 25 57 .5 45 35 52.5 20.3 fcsk2ip355*a hj 52 20 e3 4.50 290 1305 3 27 57.5 50 35 52.5 20.3 fcsk2ip455*a hl 52 20 e3 5.00 290 1450 3 27 57.5 45 45 52.5 20.3 fcsk2ip505*a hk5 2 20 e3 5.00 290 1450 2 29 57.5 55 40 52.5 20.3 fcsk2ip505*a hm 52 20 e3 1000v dc (480v ac ) 3a 1.80 500 900 6 21 42.5 45 30 37.5 20.3 fcs3a ip 185* a ff3720 e3 2.20 500 1100 5 23 42.5 43 42 37.5 20.3 fcs3a ip 225* a fe3720 e3 2.20 350 770 6 23 57.5 43.5 29.5 52.5 20.3 fcs3a ip 225* a hg 52 20 e3 2.50 350 875 5 24 57.5 45 30 52.5 20.3 fcs3a ip 255* a hh 52 20 e3 3.00 350 1050 5 24 57.5 45 35 52.5 20.3 fcs3a ip 305* a hj 52 20 e3 3.30 3 50 1155 4 25 57.5 50 35 52.5 20.3 fcs3a ip 335* a hl 52 20 e3 3.50 350 1225 4 25 57.5 45 45 52.5 20.3 fcs3a ip 355* a hk 52 20 e3 4.50 350 1575 4 28 57.5 55 40 52.5 20.3 fcs3a ip 455* a hm 52 20 e3 1200v dc (500v ac ) 3b 1.20 650 780 7 20.6 42.5 45 30 37.5 20.3 fcs3b ip 12 5* a ff3720 e3 1.50 650 975 6 22 42.5 43 42 37.5 20.3 fcs3b ip 155* a fe37 2 0 e3 1.50 455 683 6 22 57.5 43.5 29.5 52.5 20.3 fcs3b ip 155* a hg5220 e3 1.80 455 819 6 23 57.5 45 30 52.5 20.3 fcs3b ip 185* a hh 52 20 e3 2.00 455 910 5 24 57.5 45 35 52.5 20.3 fcs3b ip 20 5* a hj 52 20 e3 2.20 455 1001 5 24 57.5 50 35 52.5 20.3 fcs3b ip 225* a hl 52 20 e3 2.50 455 1138 4 25 57.5 45 45 52.5 20.3 fcs3b ip 255* a hk 52 20 e3 3.00 455 1365 4 26 57.5 55 40 52.5 20.3 fcs3b ip 305* a hm 52 20 e3 1600v dc (550v ac ) 3c 0.80 800 640 8 20.5 42.5 45 30 37.5 20.3 fcs3c ip 804* a ff3720 e3 1.00 800 800 7 21 42.5 43 42 37.5 20.3 fcs3c ip 105* a fe3720 e3 1.00 560 560 6 22 57.5 43.5 29.5 52.5 20.3 fcs3c ip 105* a hg5220 e3 1.20 560 672 6 22 57.5 45 30 52.5 20.3 fcs3c ip 125* a hh5 2 20 e3 1.40 560 784 5 23 57.5 45 35 52.5 20.3 fcs3c ip 145* a hj 52 20 e3 1.60 560 896 5 23 57.5 50 35 52.5 20.3 fcs3c ip 165* a hl 52 20 e3 1.70 560 952 4 24 57.5 45 45 52.5 20.3 fcs3c ip 175* a hk 52 20 e3 2.00 560 1120 4 25 57.5 55 40 52.5 20.3 fcs3c ip 305* a hm 52 20 e3 2000v dc (630v ac ) 3d 0.56 1000 560 9 20.1 42.5 45 30 37.5 20.3 fcs3dip564*a ff3720 e3 0.70 1000 700 8 20 42.5 43 42 37.5 20.3 fcs3dip704*a fe3720 e3 0.75 720 540 8 21 57.5 43.5 29.5 52.5 20.3 fcs3dip754*a hg5220 e3 0.82 720 590 7 21 57.5 45 30 52.5 20.3 fcs3dip824*a hh 52 20 e3 0.90 720 648 6 22 57.5 45 35 52.5 20.3 fcs3dip904*a hj 52 20 e3 1.00 720 720 6 22 57.5 50 35 52.5 20.3 fcs3dip105*a hl 52 20 e3 1.20 720 864 5 22 57.5 45 45 52.5 20.3 fcs3dip125*a hk 52 20 e3 1.40 720 1008 4 24 57.5 55 40 52.5 20.3 fcs3dip145*a hm 52 20 e3 (1) maximum permissible peak current ?*? to be defined, see ordering code table (2) series resistance at 20c ambient temperature customized pr oducts are available on request (3) maximum pe rmissible r.m.s. ripple current 201 6 v 1 . 2
cbb 16 2 i p series dimensions preferred style a: 4 pin ?d = 1,2mm +/ - 0,05 lp = 5,0 +/ - 1mm other styles on request. marking no. item 1 brand 2 series d esignation 3 capacitance, t olerance , and r ated v oltage 4 date c ode internal construction no. item material 1 dielectric f ilm polypropylene 2 single - sided m etallized f ilm pp + al 3 double s ided m etallized c arrier f ilm pet + al 4 metal s prayed c ontact zn + sn/zn 5 terminals sn - coated cu 6 potting c ompound epoxy 7 case flame retardant pbt 201 6 v 1 . 2
cbb 16 2 i p series life time expectancy ordering c ode 201 6 v 1 . 2
jianghai film capacitors warranty: the information contained in this datasheet does neither form part of any quotation nor of a contract, it is believed to be accurate, reliable and up to date. quality data are based on the statistical evaluations of a large quantity of parts and do not con stitute a guarantee in a legal sense. however, agreement on these specifications does mean that the customer may claim for replacement of individual defective capacitors within the terms of delivery. we cannot assume any liability beyond the replacement of defective components. this applies in particular to any further consequences of component failure. furthermore it must be taken into consideration that the figures stated for lifetime, failure rates and outlier percentages refer to the average production status and are therefore to be understood as mean values (statistical expectations) for a large number of delivery lots of identical capacitors. these figures are based on application experience and data obtained from preceding tests under normal condition s, or ? for purpose of accelerated aging ? more severe conditions. jianghai reserves the right to change these specifications without prior notice. any application information given is advisory and does not form part of any specification. the products are not primarily designed for use in life supporting applications, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. jianghai customers using or selling these products for use in such applications without prior written consent of jianghai do so at their own risk and agree fully to indemnify jianghai for any damage resulting from such improper use or sale. this version of the datasheet supersedes all previous versions. rated voltage u r : rated voltage is the m aximum operating peak voltage of either polarity but of a non - reversing type waveform, for which the capacitor has been designed, for continuous operatio n. the rated voltage is marked on the capacitor and defined in the datasheets as u r . op erating voltage : the plastic film capacitor varies in the maximum applicable voltage depending on the applied voltage waveform, current waveform, frequency, ambient temperature (capacitor surface temperature), capacitance value, etc. be sure to use capacit ors within the specified values by checking the voltage waveform, current waveform, and frequency applied to them (in the application of high frequency, the permissible voltage varies with the type of the capacitor. refer to the specification for details.) . non - recurrent surge voltage us peak voltage induced by a switching or any other disturbance of the system which is allowed for a limited number of times and for durations shorter than the basic period. - maximum duration: 50 ms / pulse - maximum number of occurrences: 1000 (during load) maximum rate of voltage rise dv/dt : maximum permissible repetitive rate of voltage rise of the operational voltage. charging and discharging : because the charging and discharging current of capacitor is obtained by the product of voltage rise rate (dv/dt) and capacitance, low voltage charging and discharging may also cause deterioration of capacitor such as shorting and open due to sudden charging and discharging current. when charging and discharging, pass through a res istance of 20/v to1000/v or more to limit the current. when connecting multiple film capacitors in parallel in withstand voltage test or life test, connect a resistance of 20/v to1000/v or more in series to each capacitor (for detail see the specificat ion) . in addition, capacitors must be discharged via a resistor before handling. because the capacitors do not have any discharge resistors built - in, there is a risk of residual voltages and electric energy contents that maybe dangerous. operating current the pulse (or ac) current flowing through the capacitor is expressed as: i = c x dv/dt. due to the fact that the dissipation factor of the capacitor is greater than zero, heat will be generated in any application where alternating currents or pulses occur. the resulting internal temperature rise may cause a severe deterioration of the capacitor?s withstanding voltage, or may lead to a breakdown (even smoke or fire may result).therefore, the safe use of capacitor must be within the rated voltage (or category voltage) and the permissible current ranges. the rated current must be considered by dividing into pulse current (peak current) and continuous current (rms current) depending on the break down mode, and when using, should make sure the both currents are w ithin the permissible range. temperature range: use film capacitors only within the specified operating temperature range. expected lifetime t he expected lifetime of the capacitor depends on the applied voltage and the hot spot temperature during operation. for capacitors applied in different situations, the obtainable average service lives are different. the capacitors used in dc - link circuits will have a n expected lifetime of approximately 100000 hours at rated voltage and 70 hot spot temperatur e. insulation voltage u i : rms value of ac voltage designed for the insulation between terminals of the capacitor to case or earth. the insulation voltage is equal to the rated voltage of the capacitor, divided by , unless otherwise specified. voltage between terminals u tt : voltage between terminals (at 20c, 10s) 1.5u rdc voltage between terminals and case u tc : voltage between terminals and case (at 20c, 10s): 2 ui + 1000 or 3000 (v ac ), whichever value is larger. buzzing noise : any buzzing n oise produced by a capacitor is caused by the vibration of the film due to the coulomb force that is generated between the electrodes with opposite poles. if the wave - form with a high distortion rate or frequency is applied across the capacitor, the buzzing noise will become louder. but the buzzing noise is of no harm to the capacitor. surface over temperature case : when current continuously flow through the capacitor, the temperature inside the capacitor will rise induced by dissipated heat. if t he temperature exceeds the maximum allowed hot - spot temperature, it might cause a short circuit or fire. the limits described in the catalogue must not be exceeded and it's necessary to check the temperature on the capacitor?s surface in operation. flame r etardation : although flame retarding pu resin or plastic case material is used in the coating or encapsulation of plastic film capacitors, continuous exposure to high temperature ambient or fire will break the coating layer or plastic case of the capacitor , and may lead to melting and ignition of the capacitor element. humid ambient : if used for a long time in a humid ambient, the capacitor might absorb humidity and oxidize the electrodes causing damage to the capacitor . i n case of ac application, high humidity would increase the corona effect. this phenomenon causes a drop in capacitance and a n increase of capacitor losses. storage conditions : 1) capacitors must not be stored in corrosive atmospheres, particularly not when chlorides, sulfides, acids, lye, salts, organic solvents or similar substances are present. 2) it must not be stored in high temperature and/or high humidity environments. the following storage conditions must be kept (applicable only for storage in the o riginal package): temperature: 35 c humidity: 80% rh, no dew allowed on the capacitor. storage time: 24 months (from the date marked on the capacitor's body or on the label sticking to the package) mounting: other devices, which are mounted near the capacitor, should not touch the capacitor. additional heat coming from other components near the capacitor may reduce the lifetime of the capacitor. do never attempt to bend or twist the capacitor a fter mounting and avoid any mechanical stress on the term inal s. never exceed the max. permissible torques when tightening the terminal screws or the mounting bolt?s cap nuts. caution during use of capacitors: do not touch the terminals of capacitors. keep the capacitor free from conductive solution, such as acid s, alkali and so on. ensure that the operating environment of the equipment into which the capacitor has been built is within the specified conditions mentioned in the catalogue or specification sheets. definition of electrical parameters: separate docume nts as application notes, equivalent circuit diagrams and so on are available on request. packaging: please refer to the data book for details. further information is available on request. j ianghai europe electronic components gmbh v 2 0 5 1 4 2
|
